Accessing vCenter Server from Internet (remote network)
- Статус: Closed
- Награды: $50
- Полученные заявки: 3
Краткое описание конкурса
First of all my goal to access my vcenter from internet from public without use public
I would like to be able to give my users access to the vCenter Server through the Internet ( but security is not the main concern here, at least not now).
I read that vCenter needs port 443 to be open in order to accept vSphere Client requests. But I don't know how exactly this should work (important: it's just a test environment; vCenter Server does not have any precious data so at least now I'm not concerned about security; I simply want to learn how to do this).
DDNS NO IP hostname ( khaled5051.ddns.net)
i have home networt ISP ( 192.168.XX.XX ) which it praivte network and i want to link my praivte network to public network (37.104.XX.XX ) by DDNS forward port
i get the below anser comment by google but i do not know how to do it ?
" On your router, also forward port 902 to your VMWare host IP address.
When outside of your network this method should work as following:
Connected using External IP (go to google and search "what is my IP") > Internal Router
Router Setup = Single Port Forwarding:
ESX Host = 443 > 443 > Both (TCP/UDP) > Your machine's IP > Enabled
Vsphere Client = 902 > 902 > Both (TCP/UDP) > Your machine's IP > Enabled
Computer Setup = Firewall Settings:
Inbound = Set VMware Player/Vsphere Client/Workstation/etc. > Private, Public, and Domain!
Outbound = Do the same for outbound as you did for inbound!
Testing Using CMD = Ensure Telnet is enabled:
telnet (External IP Address you got from google) (Ports that are need to be tested)
Example: telnet 182.521.22.1 902 (do the same for 443)
If you get a blank black screen then you connected successfully and you can connect remotely
Testing Vsphere Client:
When you open the Program:
Type in the External IP:Port Number
External IP Address: 182.521.22.1:443
If you connect to your ESXi Host, then you've been successful!
If you are unable to connect or telnet:
1. Check your firewall to ensure ports 902 and 443 are allowed for Inbound/Outbound for Domain, Public, and Private.
2. Check to see if you have any other program blocking the connection by disabling the program from running (Malwarebytes, etc.)
As a side note, you might want to sign up for dynamic DNS so you can use a host name for you External facing IP address. You can then sign into the Vshphere Client using the FQDN of your DDNS rather than your External IP address. ""