Фильтр

Мои последние поисковые запросы
Фильтровать по:
Бюджет
по
по
по
Тип
Навыки
Языки
    Статус работы
    1,157 asm работ(-а,-ы) найдено, цены указаны в USD
    mouse Завершено left

    create a program that displays the row and column number of the position of the mouse any time. this program must use BIOS and DOS interrupt calls to interact with the user through the system input/output operations. In place of specific procedure or subroutine calls, create macros in your codeand provide the information as named parameters. As a suggestion create two macros, one to input mouse co...

    $2 (Avg Bid)
    $2 Ср. ставка
    1 ставки
    Assembler RegExp Завершено left

    I need a single procedure written in 16-bit assembly which accepts three strings (pointers). The function definition follows: regexp source, pattern, submatches As mentioned above, the 3 parameters are all 16-bit pointers to near strings. "source" is the string to be parsed and can contain any ascii value accept NULL. This string will be NULL terminated. Its location will be assumed to b...

    $41 (Avg Bid)
    $41 Ср. ставка
    3 ставки
    atmel avr(repost) Завершено left

    Avr Parallel Fuse Programmer I am new at AVR code and require some source code reported to work in an atmega128. The source code is now ported for a 90S1200-4. I will need both compiled (hex)and source code. Only asm (NO C source)please. And the changes that were made noted in the file. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete so...

    $106 (Avg Bid)
    $106 Ср. ставка
    2 ставки
    clear screen Завершено left

    write a program that: 1) clears the screen 2) sets the cursor at row = 8 and column = 14 3) displays the string "IBM Personal Computer" ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverab...

    $3 (Avg Bid)
    $3 Ср. ставка
    3 ставки
    atmel avr Завершено left

    I am new at AVR code and require some source code reported to work in 2 other chips. The source code is now ported for a 90S1200-4. I require the code to work with a 90S8515-8 and an atmega128-16. I will need both compiled (hex)and source code. Only asm (NO C source)please. And the changes that were made noted in the file. ## Deliverables 1) Complete and fully-functional working program(s) in e...

    $42 (Avg Bid)
    $42 Ср. ставка
    1 ставки
    Assembly Language coder needed Завершено left

    Need a bit of help with some asm comparing some old code with new code. If you know IDA that's a plus. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Exclus...

    $29 (Avg Bid)
    $29 Ср. ставка
    3 ставки
    Game Client Emulator Завершено left

    Hi, This is a project to write an emulator for a game client, that can do the same thing as the client itself, but be more friendly and allowing updates, and additions. The emulator has to completely duplicate the original client itself and be easy to edit and add things. I will give full working server files, the client and a location to download the game itself. The game client I am pretty ...

    $425 (Avg Bid)
    $425 Ср. ставка
    2 ставки
    Project dealing with FFMPEG. Завершено left

    I am seeking a developer who can work on the [войдите, чтобы посмотреть URL] project. Developers should have GOOD knowledge in vc++, C, ASM and so forth, The developer will need to take some of the audio and video codecs from the project and make them into com objects, the audio and video codecs we will need are as follows : Audio : 1) MPEG audio layer 1/3 2) MPEG audio layer 2 ...

    $935 (Avg Bid)
    $935 Ср. ставка
    6 ставки
    ASM coder needed Завершено left

    Hi, For highly optimizing an algorithm (coded in Delphi) (calculates size, place of images) I need someone experienced in coding highly optimized code in ASM for improving the performance of the existing algorithm. Thanks for your interest. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation...

    $30 (Avg Bid)
    $30 Ср. ставка
    13 ставки
    75691 Ecommerce - Read inside Завершено left

    First thing, I want the prospective developer to know that I am probably the most cooperative buyer you will find, or atleast one of them. Also, you should have scriptlance comments/ratings. I know everyone starts somewhere, but, unless you have an impressive portfolio that you can PROVE is your own... I dont wish to be your beta tester. This project is featured, not because I'm rich with ...

    N/A
    Избранный
    N/A
    0 ставки
    ASM Graphics Code Завершено left

    Need a source code program in MASM 6.11 Assembly Language to draw a 30-60-90 degree triangle on the screen. Must ask user how big he wants base to be and what color he wants it displayed in. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-...

    $28 (Avg Bid)
    $28 Ср. ставка
    4 ставки
    Towers of hanoi Завершено left

    The c program is t_hanoi.c and a file of modules hanoi.c . These may be compiled separately and linked to make a test program [войдите, чтобы посмотреть URL] . Download t_hanoi.c, hanoi.c, get.c, hanoi.h , and then compile and execute t_hanoi . Notice the output. The PA5 LC3 assembly program should pretty much use the same organization as the c programs. Prepare two assembly files [войдите,...

    $34 (Avg Bid)
    $34 Ср. ставка
    1 ставки
    ASM TO VB FORMAT Завершено left

    look for someone that knows ASM and VB that can rewrite something from asm to vb ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Exclusive and complete copyrights to ...

    $27 (Avg Bid)
    $27 Ср. ставка
    19 ставки
    Keyboard interrupt Завершено left

    The task is to write a keyboard interrupt server that adds new characters from the keyboard to the keyboard buffer queue. There is already a proto-type tester in [войдите, чтобы посмотреть URL] . The server you write shall be called isrv , and the code inserted in the place specified in [войдите, чтобы посмотреть URL] . Characters are input and accessed by user programs asynchronously, a...

    $42 (Avg Bid)
    $42 Ср. ставка
    1 ставки
    Assemble Developer... Завершено left

    I would like to introduce my self, my name is martin gordor, i am a consultant in the USA, my company seeks projects with corporations within the USA and canada, we have a project availible, the description is below, i have never used rent-a-coder before, so bare with me ;) Basically what we are looking for is the following ; 1) We are seeking for a ASM developer who can look ovr 4 of our cus...

    $1147 (Avg Bid)
    $1147 Ср. ставка
    8 ставки

    I need to know how to read from and write to a specific memory location. It needs to be in C/C++ or inline ASM. This is not a Windows Project and will be done from DOS. ## Deliverables Detailed source code with details on changing memory locations, restrictions on what memory can be accessed and advise on how to boot the system to be able to use the program. ## Platform DOS type only

    $16 (Avg Bid)
    $16 Ср. ставка
    27 ставки

    **Electronic Flickering Candle **Based on microcontroller, PIC or Atmel driving 3 Light emitting diodes, LEDs and accepting input from thermistor and potentiometer sensitivity control. Allow three LEDs arranged in vertical pattern to replicate flicker of real candle [войдите, чтобы посмотреть URL] PWM or PPM, preferably,**Must** be able to dim and fade LEDs , **NOT** just full on or off....

    $258 (Avg Bid)
    $258 Ср. ставка
    8 ставки

    I have a windows program that converts files from test equipment from one format to another. I need to know what these file formats are. There are approx. 5 formats in all. I'm assuming that this would be easy for someone that knows x86 assembler. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Inst...

    $65 (Avg Bid)
    $65 Ср. ставка
    12 ставки
    IDE for IBasic like RapidQ Завершено left

    I cancelled this and it should be taken off soon. Thanks for the input. I'm coding it myself now, heh. I do recommend IBasic though. I love the language, and know a few others, including C and ASM. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Complete ownership and distribution copyrights to all ...

    $100 - $150
    $100 - $150
    0 ставки

    I am writing a program which I need to "communicate" with another program written by someone else. All I need to know is what format the other program passes data back and forth so my program can "see" it. I'm assuming someone with some knowledge of ASM/Assembly language and relevant tools such as W32dasm/SoftICE or other disassembler software can find this information out...

    $21 (Avg Bid)
    $21 Ср. ставка
    2 ставки
    ASM and VC++ optimization... Завершено left

    Greetings, we are seeking a developer who has good knowledge in optimizing applications using ASM and VC++, we have 4 peices of software which need heavy optimizations using ASM, VC++ and ASM... Please contact us for more information... Explaining here will be very hard... thank you ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source...

    $541 (Avg Bid)
    $541 Ср. ставка
    4 ставки

    This project involves the control of laser light show display systems for tradeshow and entertainment use. The software is design to allow real-time manipulations of all image and data parameters. The source code has been written in a couple of languages. The dos main program compiles to approx. 103Kb total. I have other features in source code that I would like to place inside this program to enh...

    $136 (Avg Bid)
    $136 Ср. ставка
    9 ставки
    optimizing c++ applications Завершено left

    We are seeking a developer who has knowledge in optimizing and testing applications, we now have 2 medium sized aplications which need to be optimed and throughly tested to the extreme, it would be great if you can test the apps on the following OS's : 98, NT, ME, 2K, XP, 03 if possible. The developer should have tools like VTUNE and so on to help test and stress the application, The develope...

    $527 (Avg Bid)
    $527 Ср. ставка
    13 ставки

    This is a unique project. We own and operate the Grokster service ([войдите, чтобы посмотреть URL]) and we require a modification to our client similar to KazaaLite's K++ (KPP) add-on. The (ASM) source for KPP is available here: [войдите, чтобы посмотреть URL] This code does not work directly with Grokster as it is made to work with the latest Kazaa releases (2+). We wish to have this free co...

    $170 (Avg Bid)
    $170 Ср. ставка
    3 ставки

    We have 2 application which need to be optomized, they are both done in vc++ 6.0 and work very we'll, we need a developer who is intersted in fixing some bugs within these apps, developer should also hve testing tools availible at hios disposal. Developer should be willing to spend long hours testing the applications and making sure there are no visible and obvious bugs... Developer should ha...

    $495 (Avg Bid)
    $495 Ср. ставка
    13 ставки

    Developer a virtual mouse and keyboard driver which will be used within an application sharing solution, this will help to make things much faster within the application sharing solution. 1) Developer must know how to work with ASM / VC++. 2) Developer must have knowledge in Driver Developement.... 3) Developer must be fast! ## Deliverables 1) Complete and fully-functional working program(s) in...

    $538 (Avg Bid)
    $538 Ср. ставка
    3 ставки

    For this problem you are to write an assembly language program to subtract very large integers. The integers should be represented in base 16. In particular integers that are to large to fit in a register, your program should be able to sutract integers that are at least 60 digits long. To do this you will read each integer by reading in a sequence of digits in an array. You will then go thru the ...

    $21 (Avg Bid)
    $21 Ср. ставка
    4 ставки
    MASM 611 For Dos Program Завершено left

    Pseudo Code: Main Program 1. Ask user for width, length and height. These will be used to compute the wall area 2. Put these on the stack to pass to the subroutine 3. Call the area subroutine 4. Display the Area computed with appropriate annotations 5. Sum the area to be painted 6. Check to see if there is another room to be painted and loop back to input to get the dimensions. 7. Set the AX-Regis...

    $30 - $100
    $30 - $100
    0 ставки

    This is a simple work if you know how to work with VC++ 6.0 All i need is a dll (that can be called as a normal dll, not activex, i want to call it from c or asm, etc) that let me call [войдите, чтобы посмотреть URL] to run vbs or js codes. For a good idea of what im looking for check: [войдите, чтобы посмотреть URL] (there is even a source there!! You only need to add some small things and adapt ...

    $24 (Avg Bid)
    $24 Ср. ставка
    4 ставки
    Advanced Sending Keys Завершено left

    Language: Major: Visual Basic, Minor: ASM Experience: Elite, Expert NOTE TO SOFTWARE BUYERS: This project has been posted by one advance programmer to another in search of a satisfactory procedure thats virtualy impossible for any novice programmer to answer, therefor I assure you the winning bidder on this project has surely earned the title of being "Elite" THE OVERVIEW: Im subclassing...

    $8 (Avg Bid)
    $8 Ср. ставка
    2 ставки
    webserver statistic software Завершено left

    Hi, I need a software for generating statistic-reports of webservers. It must support both Apache/IIS (all formats!) and Win/Unix/Linux. Code for parsing must be highly optimized (ASM..?). It must generate reports where you can see how the visitors move throught your website. I want to know from which link to which link he moves, and how long he stays on a page before he goes to the next page. Imp...

    $280 (Avg Bid)
    $280 Ср. ставка
    4 ставки
    ASM or C/C++ .DLL needed Завершено left

    Please read the full bid request before bidding. I need a DLL coded in Assembly or C/C++ that sorts records from a text file to another file. The input file will contain two fields per line delimited by a single character like "," or Tab (no text qualifier). The output file should be in the same format and sorted on the second field. For example: Input file: Saurabh,Gupta ZZZ,Cdef John,S...

    $48 (Avg Bid)
    $48 Ср. ставка
    28 ставки
    Program Segment Prefix and Files Завершено left

    A simple asm program to print the command line parameter to the screen. Please see attached brief. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Fully commented pre/post conditions and comments 3) Complete ownership and distribution copyrights to all work purchased. ## Platform Windows

    $14 (Avg Bid)
    $14 Ср. ставка
    2 ставки
    Win32 - DLL - Words in File Завершено left

    This Win32 - DLL - will return all Unique Words in File. (details - please read below). Only Serious Bidders - need apply! Bidder's with immediate example - will have priority! Must be done in either C++ or ASM or (both). DLL - Must return a Exported STRING$ I have other bids out as well, and I'm going to pay for all of them! - I need to find the best solution, and for the person who giv...

    $89 (Avg Bid)
    $89 Ср. ставка
    1 ставки
    Asm Завершено left

    attched the file ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Complete ownership and distribution copyrights to all work purchased. ## Platform Unix

    $15 - $20
    $15 - $20
    0 ставки
    mp3 to wav / wav to mp3 Завершено left

    I want a code that converts mp3 to wav and viceversa. The code cannot use 3th party activex or executables. You can call [войдите, чтобы посмотреть URL], [войдите, чтобы посмотреть URL], etc. but directly (without wrappers). i preffer this way: [войдите, чтобы посмотреть URL] ([войдите, чтобы посмотреть URL], etc) to convert wav to mp3 -fraunhofer ACM to convert mp3 to wav ( i think that [войдите,...

    $35 (Avg Bid)
    $35 Ср. ставка
    7 ставки
    Search engine digger Завершено left

    For our company website we have written a search engine in PHP. The engine indexes every document on our site and stores the data in a MySQL database. To search the database, we have written a small (< 500 lines) PHP script to merge the results for each word. Currently we support basic functionality such as including and excluding words in your search query. It is also possible to search within...

    $105 (Avg Bid)
    $105 Ср. ставка
    14 ставки

    This project will involve the development of a Compiler with a Parser (preferably Recursive Descent), Scanner and Pluggable Code Generator Object. The Code Generator Object should be designed so that we can plug in different asm outputs. EBNF will be provided for the language, which is a strongly typed object oriented language along the lines of Borland's Delphi. You will not be responsible f...

    PHP
    $824 (Avg Bid)
    $824 Ср. ставка
    5 ставки

    NOTE: We are looking for sales people to secure software development contracts for **US** we are **NOT** looking for software developers. Our growing company needs some interested individuals to seek out and secure contracts for us. These individuals will receive a commission through rent a coder for every large software development contract secured. What we are looking for: Our compan...

    $410 (Avg Bid)
    $410 Ср. ставка
    8 ставки
    assembly language Завершено left

    download the question and what i need it convert the [войдите, чтобы посмотреть URL] into [войдите, чтобы посмотреть URL] download the [войдите, чтобы посмотреть URL] program ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run...

    $3 (Avg Bid)
    $3 Ср. ставка
    3 ставки

    Simple keypad scan source needed. I need to have a program that will scan a key if pressed on a 4x4 (16 key) keypad. I need the board to operate in expanded mode not single chip mode. That means that the 8 pins on the keypad have to be connected to port D and port E (4 pins each). I want to have the ascii value of the detected key stored in an accumulator. ## Deliverables 1)I just require the s...

    $14 (Avg Bid)
    $14 Ср. ставка
    1 ставки

    I am working on a simple engineering project for school. It is a water tester for a fish tank. I am using the Motorola HC6811 microproccesor to run my hardware but i am not familiar with buffallo, so i am looking for a final .s19 file to run on my computer. I already have some of it written, and it works fine but i need to ad on a few things. Basically this is what i am looking. In the beginning i...

    $127 (Avg Bid)
    $127 Ср. ставка
    1 ставки
    Very Simple HC6811 Buffallo Code Завершено left

    I am working on a simple engineering project for school. It is a water tester for a fish tank. I am using the Motorola HC6811 microproccesor to run my hardware but i am not familiar with buffallo, so i am looking for a final .s19 file to run on my computer. I already have some of it written, and it works fine but i need to ad on a few things. Basically this is what i am looking. In the beginning i...

    $72 (Avg Bid)
    $72 Ср. ставка
    3 ставки
    Assembly language ''HEXIO'' Завершено left

    download the program and what i want is modify this program [войдите, чтобы посмотреть URL] to output the same case with input for A --> F or a --> f ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) sp...

    $4 (Avg Bid)
    $4 Ср. ставка
    5 ставки
    Recreation, ASM Завершено left

    I'm looking for someone who can recreate options in a game. As you should know, all game's have options, my game has, Auto-Aim, Show Enemies, ect. I'm looking for someone who can create a application for me that will run as a third party app, and will interact with the game. What needs to be done is, you need to copy the options (Auto-Aim, Show Enemies) and create a new place in the...

    $25 (Avg Bid)
    $25 Ср. ставка
    2 ставки
    PIC/Microprocessor LCD Driver Завершено left

    To help produce an Alphanumeric LCD display driver to act as an audio vu meter using a PIC or similar microprocessor. Objective is to produce as cheaply as possible for potential production purposes. LCD display will be 16x2 in size, alphanumeric - not dotmatrix. Choice of processor will depend on ADC, and/or external ADC. Experience in this field of electronics essential. Example output: [войдите...

    $291 (Avg Bid)
    $291 Ср. ставка
    18 ставки
    C++ Raw Video File Formats Завершено left

    We are making the third version of our Video Editing software called AVIMGen3, in C++ (6.0 or .NET, same compiler almost). The program is mostly done but so far it can not save in any formats. It can import .avi files but we are stuck on nothing but things like pointers to arrays of pointers, which don't seem to be working out. Basically I need someone to fix the .avi export code which uses t...

    $148 (Avg Bid)
    $148 Ср. ставка
    4 ставки
    Simple ''Read File'' MASM Project Завершено left

    Programme able to be compiled using Microsoft Macro Assembler (MASM) version 6.11 (or lower). Must run as 16 bit executable in DOS (up to Win9x DOS). Programme will display a welcome message and a prompt to enter the name of any textfile in the same directory as the executable. An error message to display if an invalid filename is input, and the option to try again. If a valid filename is input, t...

    $12 (Avg Bid)
    $12 Ср. ставка
    1 ставки
    BlockUnBlock the Screen. Завершено left

    I need a C++CASM code that BlockUnBlock the Screen with a BitMap message on the top screen. *** The Code Must Block the screen without (hide,close,kill or put in the TaskBar) the program that was in the screen. * mean not change any windows in the screen (not hide, not close, not put in the TaskBar) (for example when DirectX program run on then screen, the BlockScreen do not close it just but a...

    $23 (Avg Bid)
    $23 Ср. ставка
    3 ставки
    Micrichip PIC ASM Code edit Завершено left

    Hi Looking for a coder that an handle Microchip ASM coding. Need to mod a existing code. ## Deliverables Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. Complete copyrights to all work purchased. ## Platform Microchip ASM

    $171 (Avg Bid)
    $171 Ср. ставка
    10 ставки