Фильтр

Мои последние поисковые запросы
Фильтровать по:
Бюджет
по
по
по
Тип
Навыки
Языки
    Статус работы
    156 excel 5060 работ(-а,-ы) найдено, цены указаны в USD

    ...Ubiquiti Edgerouter at the remote site, establish an IPSEC VPN to a Ubuntu 16.04 VPS server and then have all SIP traffic route over the VPN to allow 5060 traffic out of Dubai which blocks SIP on 5060. Install IPSEC on the Ubuntu server (currently in production hosting web app) Configure VPN Ensure only SIP traffic flows over VPN lock down the entire

    $136 (Avg Bid)
    $136 Ср. ставка
    9 ставки

    ...1) Upon installation of Softphone, prompt for username and password 2) It will then login to a website (MySQL) and get the pbx server hostname, username(ext), password, port (5060 or 5160) and URL for customer logo 3) configure the phone with the provide info and replace default logo with customer logo. If customer logo do not exist use default logo

    $250 (Avg Bid)
    $250 Ср. ставка
    1 ставки

    ...ails&id=1&Itemid=621 Here's an example of how I accomplished this years ago, but with a Jsom, if you look at a field Swap for My listing: and enter a valid listing ID (try 5060), it will then be imported via RSS and Jsom and become part of the message HTML: [login to view URL] I need a more visual and modern aproach, ideally when a user

    $147 (Avg Bid)
    $147 Ср. ставка
    8 ставки

    Simple SIP redirect Routing system ,listen on port 5060 .It authenticate the incoming SIP invite source IP address , retrieve data by connecting to Mysql or Sql server, get values that should be appended to sip contact header edit/append sip contact : content ,then send it back to source of invite ,wait for ACK and send invite again if no ACK

    $370 (Avg Bid)
    $370 Ср. ставка
    6 ставки

    I have a FreePBX server and I need to route all VOIP traffic by port. 5060 and 10000 through 20000 through 1 gateway and all other ports through another gateway. All in same subnet same interface. Our ITSP (Spectrum enterprise) will not allow anything other that VOIP traffic through their Voice network. Diagram enclosed. Something like this. http://www

    $25 (Avg Bid)
    $25 Ср. ставка
    1 ставки

    Hello, I have an FXO gw SPA400 behind a firewall /home router. It has a local IP : 192.168.1.x. The asterisk server has a public IP address. I have forwarded UDP ports 5060 and 10000-20000 in the router to SPA400 IP address. The SPA400 can register to asterisk server. The problem is that: 1) huge delay (more than 20 sec) for outgoing PSTN calls

    $143 (Avg Bid)
    $143 Ср. ставка
    6 ставки

    ...matter what I try, I simply can't get the outgoing calls to work. I get errors like this: Call to <sip:14057577446@<xyzname>.[login to view URL]:5060> has failed; Cause: 403 Forbidden/INVITE from [login to view URL]:5060 I really need to get this fixed soon. Please let me know if you can assist and how much you think it might cost to fix the outgoing call pro...

    $75 (Avg Bid)
    $75 Ср. ставка
    1 ставки

    ...back to ISP1 AS SOON AS it’s back online. 2- Need redundant ISP Internet output on Eth0 and Eth3 with DHCP Enabled [login to view URL] Leasing from 100 to 200. 3- Port forwarding 5060-5061 UDP and 10000-20000 UDP to IP [login to view URL] from both ISP interfaces to mention IP through eth3. 4- Need another Internet connection eth4 from ISP1 only with DHCP 192.168

    $153 (Avg Bid)
    $153 Ср. ставка
    2 ставки

    ...8029299 Content-Disposition: form-data; name="PageCount" 3 -------------------------------28947758029299 Content-Disposition: form-data; name="FaxImage"; filename="[login to view URL]" Content-Type: application/octet-stream {Image_data} -------------------------------28947758029299-- The sample XML output should look like: <SendFax>

    $148 (Avg Bid)
    $148 Ср. ставка
    25 ставки

    ...ALG router / firewall setting disabled. 2. Add an "any/any" rule using the proxy IP of [login to view URL] 3. Open these ports on the switcher -Sip Signaling ports: 5060-5090 UDP -Audio Ports: 10000 - 64000 UDP 4. Block the incoming traffic to prevent the switch from being attacked. 5. I need this done without knocking out my voip

    $1033 (Avg Bid)
    $1033 Ср. ставка
    32 ставки

    Please create a Cisco 1921 config for me. It is for fibre internet; - WAN Port GE0/0 - ISP ...[login to view URL] - LAN DHCP Range [login to view URL] to *1.20 - Please secure the router with new passwords - Setup NAT - Allow SSH access locally only - Set up example port forwarding 5060 external to [login to view URL] Please set up other features you think will be good.

    $18 (Avg Bid)
    $18 Ср. ставка
    5 ставки

    I have 3 Routers Mikrotik in different places Now the 3 Mikrotik are connected in a VPN PPTP. Have access very good This is the connection Mikro...Client PPTP I need setup of QUEES (For QoS) I need manage the bandwith for example: Total Bandwith (2MB) 726K for PPTP Service, SQL SERVER 724k for 80, 443, 448 700k for 5060 (SIP Service)

    $48 (Avg Bid)
    $48 Ср. ставка
    7 ставки

    i have an asterisk server for call termination in a country where voip ports are blocked (5060 to 5090) so i need to create a vpn sip tunnel just like [login to view URL] service plz refer to their website for info. data will go encrypted using ssl from my ubuntu linux server, on https port 443 then on my other remote server will be decrypted and converted

    $192 (Avg Bid)
    $192 Ср. ставка
    9 ставки

    ...KAMAILIO sur un port différent du 5060 et que ce dernier relais les appels entrants et sortants entre le serveur ASTERISK d'OVH (sur lequel est installer ma ligne SIP) et mon téléphone IP. Le but est d'utiliser sur KAMAILIO un port commun comme le 443 ou autre pour bypasser le blocage du FAI qui semble bloquer le port 5060/5062. J'ai vu que ...

    $218 (Avg Bid)
    $218 Ср. ставка
    2 ставки

    ...with the Axis IP C3003-E speaker, we cannot use VPN so we use the public port of the server running asterisk and have the client open the outgoing and incomming ports needed (5060 tcp and 10000-20000 in udp). The problem we are experiencing with a customer is that the sound is not coming out of the Axis speaker and we have tried everything but nothing

    $143 (Avg Bid)
    $143 Ср. ставка
    6 ставки

    ...want to create firewall Policies for each of those VLANS. 1 VLAN - Allow all incoming and outgoing 2 VLAN - Only allow our VOIP Server, so block all ports except for 5060 and 80 3 VLAN - This is a guest network, mainly want to block torrenting and adult sites. There will be ongoing work as the network will be developed further. Also open

    $243 (Avg Bid)
    $243 Ср. ставка
    5 ставки

    ...168.1.2:5060 SIP/2.0 Via: SIP/2.0/UDP [login to view URL];rport;branch=z9hG4bKppggmt5mg1avj Max-Forwards: 70 From: <sip:01152588200 @ [login to view URL]>;tag=0tpgSjXtr3ctD To: <sip:carlos @ [login to view URL]>;tag=as00a203e3 Call-ID: 3dccd3dc4a295a7c5391c95377a45a0d @ [login to view URL]:5060 CSeq: 96649882 INFO Contact: <sip:011525882XX @ [login to ...

    $324 (Avg Bid)
    $324 Ср. ставка
    3 ставки

    For example a ITSP currently running the VoIP Service on a server which in US: [login to view URL], the port is 5060, provider want extend the VoIP service to UAE(the country which blocked the VoIP). Provider just need to set up a PERS server and place it in a country which not block the VoIP, such as Japan, US, Germany etc., assuming the PERS server

    $200 (Avg Bid)
    $200 Ср. ставка
    2 ставки

    ...sdpsession=Zoiper ra47a93e context=Zoiper ra47a93e allowguest=no directmedia=no allow=all allow=alaw allow=gsm trustrpid = yes sendrpid = yes udpbindaddr=0.0.0.0 bindport=5060 useragent=Zoiper ra47a93e 1111111111111 register => 1111111111111:pass@k1111111111111/1111111111111 [k1111111111111] type=peer secret=pass insecure=invite use

    $32 (Avg Bid)
    $32 Ср. ставка
    4 ставки

    ... The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RTP but did not workout, tried to use the VPN solutions, it's works but it's unstable and leads to a noticeable voice quality issues. So

    $58 (Avg Bid)
    $58 Ср. ставка
    5 ставки

    I have a python script that needs to be reworked. It is a short script that listens on port 5060 for a sip subscribe message and it responds back with information about where a provisioning server is located. I will provide the script to be changed and also a wireshark capture to show what the sip subscribe message will be like. The original script

    $117 (Avg Bid)
    $117 Ср. ставка
    6 ставки

    I need to bypass my ISP as they are blocking port 5060, and other port for SIP. I need to know if I can bypass using proxy to connect my PBX.. Based on my research I want SIP Proxy and RTP Proxy installed on my ubuntu which will be used as proxy server to bypass there are software like reSIProcate and rtpproxy . I want some one to install and

    $51 (Avg Bid)
    $51 Ср. ставка
    4 ставки

    ...servers.. The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RTP but did not workout, tried to use the VPN solutions, it's works but it's unstable and leads to a noticeable voice quality issues. So I

    $15 (Avg Bid)
    $15 Ср. ставка
    1 ставки

    ...servers.. The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RTP but did not workout, tried to use the VPN solutions, it's works but it's unstable and leads to a noticeable voice quality issues. So I

    $89 (Avg Bid)
    $89 Ср. ставка
    6 ставки

    ...servers.. The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RTP but did not workout, tried to use the VPN solutions, it's works but it's unstable and leads to a noticeable voice quality issues. So I

    $125 (Avg Bid)
    $125 Ср. ставка
    2 ставки

    ...servers.. The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RTP but did not workout, tried to use the VPN solutions, it's works but it's unstable and leads to a noticeable voice quality issues. So I

    $41 (Avg Bid)
    $41 Ср. ставка
    3 ставки

    ...who want to try to solve (only needs a softphone and SSH access). When I turn on iptables, my Asterisk serve cant send invite (using UDP 5060) to my another asterisk but he can register normally (using UDP 5060 too) . All servers have public IP, and are not under NAT. With tcpdump I see the package being sent on the source server but not caught

    $130 (Avg Bid)
    $130 Ср. ставка
    5 ставки

    When I turn on iptables, my Asterisk serve cant send invite (using UDP 5060) to my another asterisk but he can register normally (using UDP 5060 too) . All servers have public IP, and are not under NAT. With tcpdump I see the package being sent on the source server but not caught anything in the destination, if I turn off the firewall, the problem

    $25 (Avg Bid)
    $25 Ср. ставка
    2 ставки

    When I turn on iptables, my Asterisk serve cant send invite (using UDP 5060) to my another asterisk but he can register normally (using UDP 5060 too) . All servers have public IP, and are not under NAT. With tcpdump I see the package being sent on the source server but not caught anything in the destination.

    $27 (Avg Bid)
    $27 Ср. ставка
    16 ставки

    ...Under the command console. (CLI) This requirement is only the client application but in IOS-APPLE. The server application, is ready to test your development. [[login to view URL]:5060, UDP packages only] This is an example, therefore the UI should be the minimum necessary to write the message chat. I repeat, "the minimum necessary to write the message"

    $236 (Avg Bid)
    $236 Ср. ставка
    7 ставки

    ...need request this service of development of this software, to one programmer experienced for develop it in Smartphone IOS / Apple, which send chat messages over UDP, use port 5060, and generate UDP traffic until server. One example is available on the web and really we want that same example but en IOS/APPLE. Example: [[login to view URL]

    $249 (Avg Bid)
    $249 Ср. ставка
    5 ставки

    ...port E3-0/3 Global Configuration Add 1. Add Banner to configuration file 2. Disable SIP-ALG (Application Layer Gateway) 3. Add no ip nat service sip udp port 5060 4. Optimise router for voice usage 5. Allow external ping requests 6. Add PAT's...

    $138 (Avg Bid)
    $138 Ср. ставка
    4 ставки

    ...followed by number. i.e. 441554788822 The configuration file will contain the following data Proxy server: For example [login to view URL] Outbound Proxy port: For example 5060 Outbound Proxy server: For example [login to view URL] Registration Period: For example 600 SIP-ID: For example 2319801e0 SIP Password: For example ucccccQdgA2 Local

    $780 (Avg Bid)
    $780 Ср. ставка
    3 ставки

    ...access to any LINUX version you want. 2. You need to secure the FreePbx environment and Ubuntu Linux. 3. You need to close all default SIP 5060 ports. we need to run the free pbx on custom ports not the default 5060 ports. ...

    $163 (Avg Bid)
    $163 Ср. ставка
    21 ставки

    Hi DreamersLTD, we would like to offer you a new project. Translation of a repair manual to French translation (total 5060 words) for the amount of $200.

    $200 (Avg Bid)
    $200 Ср. ставка
    1 ставки

    I have a AAstra 6753i phone behind a NAT and a PBX hosted on a public IP. I am able to register another SIP device but not this phone. Need help to setup phone and exten...IP. I am able to register another SIP device but not this phone. Need help to setup phone and extension properly so that port registration occurs on a dynamic port and not 5060.

    $51 (Avg Bid)
    $51 Ср. ставка
    13 ставки

    I'm trying to connect to a certain carrier (this carrier has ...it's based by IP Authentication) yet is not working correctly. here is the current [login to view URL]: [kwak] canreinvite=no context=kwak qualify=yes host=[login to view URL] port=5060 type=peer disallow=all allow=ulaw trustrpid=yes sendrpid=yes insecure=port dtmfmode=rfc2833 nat=no

    $30 (Avg Bid)
    $30 Ср. ставка
    14 ставки

    We Need a SIP expert to Install + Setup outbound sip proxy server using Ubuntu or CentOS. The aim to run sip communication on ports other then 5060 which is blocked by certain ISp's. Payment will be release when the project is done with all install and configure documentation.

    $375 (Avg Bid)
    $375 Ср. ставка
    9 ставки

    ...servers .. The main purpose for it is that the ISPs here in my country blocked the SIP protocol with all of its related ports so we have tried to change the default ports from 5060 to any other with changing the RDP but did not workout , tried to use the VPN solutions, it works yet its expensive and unstable and leads to a noticeable voice quality issues

    $95 (Avg Bid)
    $95 Ср. ставка
    6 ставки

    We are trying to setup a Twilio SIP trunk with an AsteriskNOW box. W...one point we were able to dial out but now we can't even seem to do that. One of the issues is that we think that asterisk is listening on port 5038 rather than 5060. The error messages show 5060 but when we check to see what ports are being listened to, it shows aster is on 5038.

    $300 (Avg Bid)
    $300 Ср. ставка
    1 ставки

    ...MRCPSynth(welcome,l=en-US&v=Helen) ;exten => s,n,SynthAndRecog(hello word,/usr/local/unimrcp/data/[login to view URL]) same => n,Verbose(1, ${SYNTHSTATUS}) same => n,Hangup and port 5060 exten = 680,1,Answer same = n,Wait(1) ;same = n,MRCPRecog(builtin:grammar/number,f=beep&t=3000) same = n,MRCPRecog(/usr/local/unimrcp/data/[login to view URL],f=beep&t...

    $271 (Avg Bid)
    $271 Ср. ставка
    2 ставки

    ...MRCPSynth(welcome,l=en-US&v=Helen) ;exten => s,n,SynthAndRecog(hello word,/usr/local/unimrcp/data/[login to view URL]) same => n,Verbose(1, ${SYNTHSTATUS}) same => n,Hangup and port 5060 exten = 680,1,Answer same = n,Wait(1) ;same = n,MRCPRecog(builtin:grammar/number,f=beep&t=3000) same = n,MRCPRecog(/usr/local/unimrcp/data/[login to view URL],f=beep&t...

    $498 (Avg Bid)
    $498 Ср. ставка
    12 ставки

    ...project. The tunneling server will accept sip request from dialer using https and tunnel the calls to our sip proxy server on 5060 sip port ( suppose asterisk server) Sip server accept registrations on port 5060 . So what we have to do is , dialer will not connect to sip server directly instead the connection will be made via tunnel server

    $1083 (Avg Bid)
    $1083 Ср. ставка
    7 ставки

    I have a sip credential like this: SIP Domain [login to view URL]:5060 Outbound Proxy [login to view URL] User Name 15187680007 Password <redacted> Authorization ID 15023794020 and upgraded phone firmware to SIP70.9-2-1S. also have already created the xml and provisioned some times over tftp to phone, but its not getting work. stays at registering

    $23 (Avg Bid)
    $23 Ср. ставка
    1 ставки

    Ok...Who can gve me answer for this i will reward u the project...Just gve me a simple calculator that can count for me... Eg: 2245-input 5060-input 5685-input ——— 8400—answer eg: 4522-input 6005-input 8556-input ——— 0039-answer

    $29 (Avg Bid)
    $29 Ср. ставка
    7 ставки

    EC2 hosted Asterisk FreePBX extension is UNREACHABLE through pfsense firew... in_4166426516/4166426516 [login to view URL] No No 5060 OK (27 ms) out_4166426516/4166426516 [login to view URL] No No 5060 OK (27 ms)

    $82 (Avg Bid)
    $82 Ср. ставка
    13 ставки

    ...video call and audio calls are working. Line will not get cut off when picked. Other inputs needed: 1) Which sip port you are using for your sip server? Need default port(5060): 2) What transport you are using for sip? Need both tcp & udp transport enabled. you can choose any. test with udp 3) Do you have enabled nat on your server? yes need

    $526 (Avg Bid)
    $526 Ср. ставка
    1 ставки

    Have a SIP Device that needs UDP/TCP 5060 to 5061 & UDP 49152 to 65535 ports opened on router. On VPN cannot access routers of three locations from all the three locations only on one location routers are accessible need to fix this should be accessible on all locations. Create QOS Policies on Managed switch and Cisco Router to priorities traffic

    $68 (Avg Bid)
    $68 Ср. ставка
    7 ставки

    Have a SIP Device that needs UDP/TCP 5060 to 5061 & UDP 49152 to 65535 ports opened on router. On VPN cannot access routers of three locations from all the three locations only on one location routers are accessible need to fix this should be accessible on all locations. Create QOS Policies on Managed switch and Cisco Router to priorities traffic

    $89 (Avg Bid)
    $89 Ср. ставка
    6 ставки